Glossary Terms Archive - LSI Lighting

2

Type 2 linear shaped pattern that is the ideal choice for wider walkways, entrance roadways, on-ramps, four-lane roadways or any area requiring long, narrow lighting

3

Type 3 bat wing shaped pattern that provides a larger area of lighting coverage from a position along the perimeter of where lighting is required

3W

Type 3 Wide bat wing shaped pattern that provides a larger area of lighting coverage from a position along the perimeter of where lighting is required

4F

Type 4 Forward asymmetrical pattern that provides maximum forward throw from a position along the perimeter of where lighting is required

5C

Type 5 Concentrated symmetrical pattern ideal for parking garage entrances where high illumination levels are required

5D

Type 5 Diffuse symmetrical shaped pattern ideal for lighting the interior of parking areas, parking decks and open spaces while reducing glare and brightness

5Q

Type 5 Square shaped pattern ideal for lighting the interior of parking areas, parking decks and open spaces

5R

Type 5 Rectangular shaped pattern ideal for lighting above the center lane of parking decks or along walkways requiring long, narrow lighting

5W

Type 5 Wide symmetrical shaped pattern ideal for lighting the interior of parking areas and open spaces

Asymmetrical Diffuse pattern that provides forward throw from a position along the perimeter of where lighting is required while reducing glare and brightness

ALBC

Integral AirLink Blue wireless controller for dimming using 0-10V conductors.

ALBC 5A

AirLink Blue 5 amp Circuit controller to externally control a circuit or zone of light fixtures

ALBC 5A OS1

AirLink Blue 5 amp Circuit controller to externally control a circuit or zone of light fixtures w/ ceiling motion & daylight 9ft mounting height

ALBC 5A OS2

AirLink Blue 5 amp Circuit controller to externally control a circuit or zone of light fixtures w/ ceiling motion & daylight 40ft mounting height

AirLink Blue Daylight Motion Sensor; externally mounted to ceiling structure able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBCM DHS

AirLink Blue Daylight Harvesting Sensor; externally mounted to ceiling structure able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBCS1

Wireless control, passive infrared occupancy sensor powered by AirLink Blue that utilizes a Bluetooth™ mesh network for indoor and outdoor lighting applications allowing luminaries to wirelessly communicate and be grouped/controlled together. Programmed via app-based user interface. 8′-24′ mounting height.

ALBCS2

ALBTK

AirLink Blue Time Keeper; requires 120 volt feed from receptacle; externally mounted to wall or set on a shelf; able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBWS EO2B WH

AirLink Blue Two Button Switch; Kinetic powered – no power wiring or batteries required; externally mounted to wall or as table top remote control able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBWS EO4B WH

AirLink Blue Four Button Switch; Kinetic powered – no power wiring or batteries required; externally mounted to wall or as table top remote control able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBWS MW1B

AirLink Blue Wall Dimmer Switch; requires power wiring – hot, neutral & grounf; externally mounted to wall; able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALBWS MW4B

AirLink Blue Wall Dimmer Four Button Switch; requires power wiring – hot, neutral & grounf; externally mounted to wall; able to wirelessly control other fixtures on site in system that have AirLink Blue sensors or control modules integrated in or wired to

ALI PMK

ALI Pendant Mount J-Box Kit

ALSC

Wireless control module powered by AirLink Synapse that utilizes a 2.4 GHz self-healing mesh network allowing luminaries to wirelessly communicate and be grouped/controlled together. Requires minimum 1 gateway per site. Programmed via 2.4 GHz web-based user interface

ALSCS1

Wireless control, passive infrared occupancy sensor powered by Synapse that utilizes a 2.4 GHz self-healing mesh network allowing luminaries to wirelessely communicate and be grouped/controlled together. Requires minimum 1 gateway per site. Programmed via web-based user interface. 8′-24′ mounting height.

ALSCS2

AM

Automotive Merchandise asymmetrical pattern that provides a concentrated pattern of light ideal for perimeter and interior merchandise of automotive dealerships

AMB

Phosphor Converted Amber Colored Light

BB

Outdoor fixtures – Battery backup

BB__

Battery backup integral to the fixture that provides power for a 90 minute period of time in case of power loss. Rated for temperatures down to 0°C. Wattage may vary by product.

C10CD

10ft cord 16/5 dimming; no plug installed on TOP CENTER

C10CN

10ft cord 16/3 non-dimming; no plug installed on TOP CENTER

C3D

3’ cord with dimming; no plug

C3DEM

3’ cord with dimming and switch leg for battery

C3N

3’ cord non-dimming; no plug

C3NED

3’ cord non-dimming and switch leg for battery

C6CD

6ft cord 16/5 dimming; no plug installed on TOP CENTER

C6CN

6ft cord 16/3 non-dimming; no plug installed on TOP CENTER

CHS36

Chain Hanger Set (36” length) (Qty 2)

CHS60

Chain Hanger Set (60” length) (Qty 2)

CLDS

36 inch extended wiring leads from the center of the fixture

CLDSP

72 inch center wiring leads for pendant mount

CR7P

7 Pin control receptacle provides conduit for twist lock accessories such as photocells or wireless controllers. Shorting cap required for luminaire functionality if no photocell or wireless control is used.

CT

Court Optic that focuses a narrow band of light on the court perfect for new build applications with properly located poles and reducing back light.

CWBB

Outdoor fixtures – Cold weather battery backup

CWBB__

Battery backup integral to the fixture that provides power for a 90 minute period of time in case of power loss. Rated for temperatures down to -20°C. Wattage may vary by product.

DIM

Indicates that the luminaires driver is capable of 0-10V dimming

E10CD

10ft cord 16/5 dimming; no plug installed on TOP END

E10CN

10ft cord 16/3 non-dimming; no plug installed on TOP END

E6CD

6ft cord 16/5 dimming; no plug installed on TOP END

E6CN

6ft cord 16/3 non-dimming; no plug installed on TOP END

E6CW

EG3 Car Wash kit; 6’ black 16/3 SEOOW cord and fittings

EH

Extended housing

EM10

A universal voltage (120V-277V) battery backup attached to fixture that provides power for a period of time in case of building power loss. The wattage on this unit is 10 watts.

EM15

A universal voltage (120V-277V) battery backup attached to fixture that provides power for a period of time in case of building power loss. The wattage on this unit is 15 watts.

EM20

A universal voltage (120V-277V) battery backup attached to fixture that provides power for a period of time in case of building power loss. The wattage on this unit is 20 watts.

EM20HV

A high voltage (347V-480V) battery backup attached to fixture that provides power for a period of time in case of building power loss. The wattage on this unit is 20 watts.

EMC

EM with 6ft 16/4 non-dimming leads cord

EMCD

EM with 6ft 16/6 dimming leads cord

EMxx

A universal voltage (120V-277V) battery backup attached to fixture that provides power for a period of time in case of building power loss. Wattage may vary according to product.

EXT

36 inch extended wiring leads

EXT

0-10v Dimming leads extended to housing exterior for use with controls provided by others

EXTD36

Dimming leads extended 36″

EXTD72

Dimming leads extended 72″

FK22

2ft Flange kit for recessed mounting into drywall or sheet rock – wall or ceiling.

FK24

4ft Flange kit for recessed mounting into drywall or sheet rock – wall or ceiling.

FS

Field Selectable. The color (CCT) and output (lumens) can be changed via one or more switches on the fixture.

FT

Forward Throw asymmetrical pattern that provides maximum forward throw from a position along the perimeter of where lighting is required

FTA

Forward Throw Automotive linear shaped pattern that focuses a narrow band of light ideal for lighting the front row of automotive dealerships

FTW

Forward Throw Wide asymmetrical pattern that provides maximum forward throw from a position along the perimeter of where lighting is required

GRD HGR

T-Grid Hanger Kit (Qty 2)

GS

Glare Shield designed to block view of LEDs on the Zone Flood.

HC

AUL Hook

HCP120

AUL Hook, 3’ cord & 120V Twistlock Plug

HCP208

AUL Hook, 3’ cord & 208V Twistlock Plug

HCP240

AUL Hook, 3’ cord & 240V Twistlock Plug

HCP277

AUL Hook, 3’ cord & 277V Twistlock Plug

HCP480

AUL Hook, 3’ cord & 480V Twistlock Plug

HUB

Use with center mount applications (3/4” NPT HUB in BACK/TOP)

ID

Indirect Light (100% light up); a configuration of a fixture where it is inverted and all the light is directed upwards

IH

Integral half louver provides shielding and backlight control with minimal impact on forward light distribution

IL

Integral full louver provides shielding and sharp backlight control with some impact on forward light distribution

IMS1

Integral standalone motion sensor 12ft. mounting height

IMSBT1

Integral Bluetooth™ passive infrared occupancy and photocell sensor for dimming and on/off control of individual luminaires. Standalone fixture control, no mesh or group control. Programmed via Bluetooth™ wireless app-based user interface direct connect from mobile device to sensor, no gateway required. 8′-24′ mounting height.